X L T (X-Press Lift Tool )

Landing Gear Cranking GONE!

The XLT Drill System eliminates the landing gear cranking. Portable drill with connectors on the drill and the trailer eliminate all torque for fleets with a 5-10 minute install per trailer required to guarantee 100% safe use. Several other use methods provide for no trailer installation as well. The 15 seconds of landing gear work now required with the XLT Drill provides for a better rested driver and goods getting to their final destination sooner and safer.

XLT Kit Contents

XLT on trailer - ready to raise it

I-Beam Trailer TED

Did you know?

A shuttle driver making 2 trips a night with pups will operate the landing gear at least 16 times a night.

Many companies require dropping trailers at the dock to prevent fork lift accidents. XLT makes it quick & safe.

Ready to use, right out of the box. Remove handle, store it & start raising or lowering the trailer.

Why the X-Press Lift Tool ?

>>> Eliminate arm, shoulder and back strains or injuries
>>> Rested driver means a safer driver
>>> Much less time on task means less time in the weather
>>> Driver may extend employment by delaying retirement
>>> Reduce turnover by eliminating this undesired workload
>>> Help on meeting the government HOS requirements
>>> Reduce landing gear wear/tear by eliminating road impacts
>>> No more 5th wheels damaging front of trailer
>>> Fleet installation of TED safety plate is 5-10 minutes per trailer
>>> ROI of 2 months

Call an XLT System specialist @ 214-884-8258 to answer questions or to get install started or

WHAT? The X-Press Lift Tool is the product which eliminates the manual cranking of landing gear. Patented, high-torque specially designed drill to raise/lower a trailer in mere seconds SAFELY.

TORQUE? XLT needs power to raise a trailer and torque is a by product. To ensure 100% safe use, TEDs (Torque Elimination Devices) have been designed. One attached to the drill and one on the trailer interlock to eliminate all the torque. While not required, the use of TEDs guarantee a quick and safe environment and recommended for fleets. At the fleet pricing of $80 per trailer, safety is cheap and quick with the XLT products.

SAVINGS? The savings in time is obvious when the landing gear task is now less than 15 seconds. Other savings are just as important: no more injuries, rested driver, time in inclement weather reduced, reduction of landing gear maintenance.

INSTALLATION? Fleet installation is a simple 5-10 minute installation per trailer using the TED I-Beam product.

ROI? At a fleet cost of less than $500 a kit, a one year warranty, 20-50 uses of the drill on one battery, ROI is calculated to be 2 months.

HOW? The handle on the trailer is removed and a latch pin is inserted into the landing gear shaft. This allows for the specially designed quick connect coupler, to attach to the shaft and rotate it. XLT Drill replaces all manual work and safely eliminates arm, back and shoulder strains (and time). Handle is then connected to the trailer using the Ted I-Beam hangar or placed in the cab to be used as a backup.

X L T (X-Press Lift Tool )Landing Gear Cranking GONE!